We're committed to keeping you safe.

December 19, 2019 • In Heating & Cooling • 3 Min Read

Why Now is the Best Time to Replace Your Aging Heating & Cooling System

Haller Enterprises

By Haller Enterprises

Wouldn’t it be great to avoid unexpected problems, especially when it comes to systems in your home like your heater and air conditioner? The cost and logistics of repairing or replacing equipment quickly in an emergency can be challenging when surprise breakdowns occur. We have found a few common problems with heating and cooling systems roughly 10 years and older that most homeowners are not aware of. Luckily they are easy to assess at a planned maintenance visit!

Common Unexpected Problems of Aging Systems

Potential Cracked Heat Exchangers

As furnaces age, dirt and buildup can accumulate – blocking filters, clogging blowers, and reducing airflow. A lack of airflow across the heat exchanger starts to take a toll; causing potential cracks and splinters that can lead to harmful carbon monoxide emissions. Some possible signs of carbon monoxide are:

  • Streaks of soot around the furnace
  • Rust on portions of visible vent piping
  • Excessive rusting on flue pipes, and other pipe connections
  • Excess moisture on windows, walls or other cold surfaces

According to the CDC, unintentional carbon monoxide (CO) poisoning is responsible for hundreds of deaths each year and 34% of these are directly associated with heating system malfunctions. Since CO is a colorless, odorless gas, it’s difficult to detect before it starts to affect your safety and health. That’s why it’s so important to make sure your heating system is operating correctly and that you invest in the best low level Carbon Monoxide monitors available. Be aware of these warning signs and if you have any concerns our experienced technicians can perform a maintenance to make sure everything is running properly. It is good to develop a plan to replace your system before it becomes an emergency.

Loss of Efficiency

According to the Department of Energy, heating and cooling accounts for about 48% of the energy use in a typical US home, making it the largest energy expense for most homes. As systems age, they become less efficient at converting energy into heat, thus driving up the cost to maintain a comfortable living environment. If you see energy costs rising and your comfort level falling, now may be the time to consider replacing your system before the cost to maintain far outweighs the cost to replace with a more efficient system.

R22 (Freon) Phaseout

In an effort to reduce ozone depletion, the EPA is phasing out the production and import of R-22 refrigerant by 2020. This action will limit availability while driving up the cost per pound. What does this mean for you? The majority of heating and cooling systems manufactured before 2010 use R-22 refrigerant in their cooling or, in the case of heat pumps, heating process. When these aging systems have a repairable failure associated with the refrigerant part of the system, the cost of the repair will be significantly higher than in the past. In some cases, repair may be impossible. Just another reason to consider where you are in the life cycle of your heating and cooling system and plan accordingly to avoid expensive unexpected repair and replacement costs.

Avoid the Unexpected

Planned & Smart Maintenance Programs

Just like your car, your home’s mechanical systems need regular service, maintenance, and inspection to ensure that they operate at peak efficiency. Many times our technicians get called to emergency repair situations that could have been easily prevented with regular planned maintenance. We also now offer Smart Maintenance plans using state of the art technology, Sensi Predict, to monitor your system 24/7. The Sensi Predict hub can detect up to 80% of failures before they occur, keeping you ahead of problems and eliminating unexpected inconveniences.

FREE In-Home Consultations

If you are in need of a replacement system, one of our experienced HVAC Design & Sales team members can visit you same-day to review your needs and your home’s specifications. Based on the results, we will recommend the best solutions for your consideration. We can even install the system within 24 hours*!

* Scheduling is subject to change.

Financing and Rebates

We offer financing as great as 0% for 60 months* giving you time to manage your finances if something unexpected does happen. We also get top rebates from manufactures so make sure to ask about what
is currently available, and check out our offers page for current deals!

* Subject to credit approval.

By having planned maintenance performed by a professional, or scheduling a free consultation to begin understanding your options, you can be more prepared for the unexpected!

Ready To Talk To A Haller Home Services Specialist?

Featured Related Articles

August 19, 2020 • 4 Min Read

Your Fall Home Maintenance Checklist for 2020

The days are still warm and the grass is green, but autumn is just around the corner. And with all...

Continue reading

July 21, 2020 • 2 Min Read

Office Maintenance and Safety Following COVID-19

Following state regulations, many places of business have closed their offices and have transitioned to working from home. While the...

Continue reading

June 11, 2020 • 5 Min Read

To-Do’s for Your DIY Home Maintenance Checklist: Part 2

If you’re spending more time at home, there are plenty of things that you can do to take care of...

Continue reading

May 1, 2020 • 3 Min Read

To-Do’s for Your DIY Home Maintenance Checklist: Part 1

Spending more time at home? We asked our licensed technicians what you could be doing around the house to help...

Continue reading